FixVault
Home › Ford › 2013 › Explorer Base, 2.0L Eng VIN 9 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Handles, Locks, Latches And Entry Systems - With Intelligent Access › General Procedures › Remote Function Actuator (RFA) Module Keyless Entry Keypad Code Reset › General Procedure

General Procedure

NOTE: This procedure is for transferring the factory keyless entry keycode from the BCM-B  and programming it into the RFA  module.
  1. Carry out the keyless entry keypad code reset on the scan tool following the on-screen instructions.
    • The keyless entry keypad code reset procedure is found on the scan tool under Toolbox>Body>Security.
About FixVault