FixVault
Home › Ford › 2013 › Explorer Base, 2.0L Eng VIN 9 › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Abs) And Stability Control › Removal And Installation › Anti-Lock Brake System (ABS) Module › Installation

Anti-Lock Brake System (ABS) Module: Installation

  1. NOTE: Visually inspect the ABS  module terminals for damage before installation.

    Install the ABS  module and the 4 ABS  module screws.

    • Tighten to 2 Nm (18 lb-in).
  2. Install the HCU  . Refer to HYDRAULIC CONTROL UNIT (HCU) .
About FixVault