Control System Logic: Auto

When AUTO is selected:

• the temperature control setting is manually set to the desired setting.
• the air inlet door is automatically controlled by the HVAC  module based on the temperature setting.
• the mode door is automatically controlled by the HVAC  module based on the temperature setting.
• the temperature blend doors are automatically controlled by the HVAC  module, based on the temperature setting.
• the A/C compressor is automatically controlled by the HVAC  module, based on the temperature setting. The A/C compressor will not operate if the outside temperature is below approximately 6°C (42.8°F).
• the blower motor is on. The blower motor speed is automatically controlled by the HVAC  module based on the temperature setting, but can be manually overridden.