FixVault
Home › Ford › 2013 › F-150 Limited, RWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission External Controls › Removal And Installation › Selector Lever Knob › Installation

Selector Lever Knob: Installation

  1. Connect the SelectShift™ and the Tow/Haul electrical connectors and install the selector lever knob.
  2. Install a new LH selector lever knob screw.
    Fig 1: Locating LH Selector Lever Knob Screw
    G08341254Courtesy of FORD MOTOR CO.
  3. Install a new RH selector lever knob screw.
    Fig 2: Locating RH Selector Lever Knob Screw
    G08341253Courtesy of FORD MOTOR CO.
  4. Install a new LH selector lever knob cover.
    Fig 3: Installing LH Selector Lever Knob Cover
    G08341257Courtesy of FORD MOTOR CO.
  5. Install a new RH selector lever knob cover.
    Fig 4: Installing RH Selector Lever Knob Cover
    G08341258Courtesy of FORD MOTOR CO.
  6. Connect and install the floor console upper finish panel.
    Fig 5: Identifying Floor Console Upper Finish Panel
    G08341259Courtesy of FORD MOTOR CO.
  7. Install the instrument panel to floor console finish panel.
    Fig 6: Locating Instrument Panel To Floor Console Finish Panel
    G07412490Courtesy of FORD MOTOR CO.
About FixVault