FixVault
Home › Ford › 2013 › Fiesta Titanium, 4D Hatchback, Automatic DCT Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 5 (Manual Transaxle) › Disassembly And Assembly Of Subassemblies › Input Shaft › Disassembly

Input Shaft: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tools, remove and discard the bearing.
    Fig 1: Removing Bearing Using Special Tools
    G08867450Courtesy of FORD MOTOR CO.
  2. Using a suitable tool, remove and discard the bearing.
    Fig 2: Removing Bearing Using Tool
    G08867451Courtesy of FORD MOTOR CO.
About FixVault