FixVault
Home › Ford › 2013 › Flex SE › Repair and Diagnosis › External Pages › Different car › Section 1111 (Seat System) › Removal And Installation › Memory Set Switch › Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Remove the driver door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    2. Edge vehicles 

  2. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch through the front of the door trim panel.

    3. MKX vehicles 

  3. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch through the back of the door trim panel.

    4. All vehicles 

  4. To install, reverse the removal procedure.
About FixVault