Handles, Locks, Latches & Entry Systems (Without IA) DTCS
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10AB:00 | Remote Keyless Entry Synchronization: No Sub Type Information | GO to PINPOINT TEST P . |
| B1218:00 | Transmitter Identification Code: No Sub Type Information | GO to PINPOINT TEST P . |
| B121A:11 | Keypad Illumination Output: Circuit Short to Ground | GO to PINPOINT TEST O . |
| B121B:01 | Keypad Input Switch: General Electrical Failure | GO to PINPOINT TEST N . |
| B126A:01 | Drivers Door Interior Lock Switch: General Electrical Failure | GO to PINPOINT TEST K . |
| B130D:00 | Memory Full for Integrated Key Programming: No Sub Type Information | The maximum amount of IKTs (4) have been programmed into the BCM. OBTAIN all the customer's IKTs. ERASE all the IKTs and program a maximum of 4. |
| C1017:11 | Boot/Trunk Primary Switch: Circuit Short to Ground | GO to PINPOINT TEST M . |
| All other DTCs | - | REFER to the BCM DTC Chart in MULTIFUNCTION ELECTRONIC MODULES . |