Transaxle - Overhaul: Notes
SPECIAL TOOLS DESCRIPTION
| Compressor, Forward Clutch Spring (includes 307-574/1 and 307-574/2) |
|
| Compressor, Forward/Intermediate Spring 307-584 (includes 307-584/1 and 307-584/2) |
|
| Compressor, Overdrive Clutch, Balance Piston and Direct Clutch 307-589 (includes 307-589/1 and 307-589/2) |
|
| Converter Seal Installer 307-575 |
|
| Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) |
|
| Handle 205-153 (T80T-4000-W) |
|
| Holding Fixture 307-580 |
|
| Input Shaft Support Seal Installer (Back Plate, Multiple Rings) 307-578 (includes 307-578/1, 307-578/2 and 307-578/3) |
|
| Installer, Cover Axle Seal 307-582A |
|
| Manual Lever Seal Installer 307-581 |
|
| Remover, TRS Retaining Pin 307-696 |
|
| Retainer, Torque Converter 307-346 |
|
| Reverse Clutch Piston and Retaining Ring Set 307-588 (includes 307-588/1, 307-588/2 and 307-588/3) |
|
| Slide Hammer 100-001 (T50T-100-A) |
|
| Support Seal Installer 307-585 |
|
| Support Solid Seal Installer (Single Seal) 307-579 (includes 307-579/1, 307-579/2 and 307-579/3) |
MATERIAL SPECIFICATION
| Item | Specification |
|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada) |
MERCON® LV |
| Ultra Silicone Sealant TA-29 |
- |