Strut and Spring Assembly: Assembly
WARNING: This page is about a different car, the 2013 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- To assemble, reverse the disassembly procedure.
-
NOTE: Only tighten the strut rod nut finger tight at this stage.
General Equipment: Vise, Spring Compressor.
-
NOTE: Make sure that these components are installed to the noted removal position.NOTE: Make sure that the spring is correctly located in the lower spring seat.NOTE: Make sure that the installation marks are aligned.
Visual check.
General Equipment: Vise, Spring Compressor.
- General Equipment: Vise, Spring Compressor.