Powertrain Control Module (PCM) - 2.0L GTDI: Removal
WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the PMI procedure. REFER to MODULE CONFIGURATION .
- Remove the cowl panel. REFER to COWL PANEL .
- Disconnect the 2 PCM electrical connectors.
- Remove the 2 nuts and the PCM
and bracket assembly.
- Remove the 4 bolts and remove the PCM
from the bracket.