Section 383 (HVAC - Climate Control System - EMTC): Specifications
WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® A/C Cooling Coil Coating YN-29 |
- | - |
| Motorcraft®A/C System Flushing Solvent YN-23 |
- | - |
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D |
WSH-M1C231-B | 2.0L GTDI - 275 ml (9.3 fl. oz) 3.5L GTDI - 216 ml (7.3 fl. oz) 3.5L TiVCT - 275 ml (9.3 fl. oz) 3.7L TiVCT front only - 154 ml (5.2 fl. oz) 3.7L TiVCT front and rear - 234 ml (7.9 fl. oz) |
| Motorcraft R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) |
WSH-M17B19-A | 2.0L GTDI - 1.33 kg (47 oz) (2.94 lb) 3.5L GTDI - 1.33 kg (47 oz) (2.94 lb) 3.5L TiVCT - 1.16 kg (41 oz) (2.56 lb) 3.7L TiVCT front only - 0.74 kg (26 oz) (1.63 lb) 3.7L TiVCT front and rear - 1.05 kg (37 oz) (2.31 lb) |
TORQUE SPECIFICATIONS
| Description | Part Number | Torque |
|---|---|---|
| A/C combo-cooler block stud | W701890 | 8 Nm (71 lb-in) |
| A/C compressor bolts | W714077 | 25 Nm (18 lb-ft) |
| A/C compressor fitting nuts (suction and discharge) | W520413 | 20 Nm (177 lb-in) |
| A/C compressor nut | W520413 | 25 Nm (18 lb-ft) |
| A/C stud | W712610 | 9 Nm (80 lb-in) |
| A/C condenser bolt | W707393 | 6 Nm (53 lb-in) |
| A/C condenser bolt | W503924 | 6 Nm (53 lb-in) |
| A/C condenser fitting nuts (inlet and outlet) | W520413 | 20 Nm (177 lb-in) |
| Auxiliary evaporator outlet and inlet line fitting nuts | W520413 | 15 Nm (133 lb-in) |
| Condenser-to-evaporator line bracket bolt | W705139 | 8 Nm (71 lb-in) |
| Condenser-to-evaporator line bracket stud | W715390 | 8 Nm (71 lb-in) |
| Evaporator-to-compressor suction line fitting nut | W520413 | 15 Nm (133 lb-in) |
| Evaporator outlet line bracket bolt | W708877 | 15 Nm (133 lb-in) |
| Heater core and evaporator core housing bolts | N807316 | 7 Nm (62 lb-in) |
| Receiver/drier plug | - | 22 Nm (16 lb-ft) |
| TXV bolts | - | 8 Nm (71 lb-in) |
| TXV fitting nut | W520413 | 18 Nm (159 lb-in) |
| TXV manifold and tube assembly clamp bracket bolt | W705622 | 8 Nm (71 lb-in) |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| A/C clutch air gap | 0.35 mm (0.0138 in) to 0.6 mm (0.0236 in) |
| A/C pressure relief valve OPEN pressure | 3, 430 kPa (497.46 psi) to 4, 137 kPa (600 psi) |
| A/C pressure relief valve CLOSE pressure | 2, 756 kPa (399.71 psi) |
| Evaporator discharge air temperature sensor OFF temperature | 0°C (32°F) |
| Evaporator discharge air temperature sensor ON temperature | 2°C (35.6°F) |