FixVault
Home › Ford › 2014 › Escape S › Repair and Diagnosis › External Pages › Different car › Section 468 (Immobilizer System) › Immobilizer Control Unit › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the immobilizer control unit after connecting the unit connector.
  2. Install the crash pad lower panel.
About FixVault