Powertrain Control Module (PCM): Removal

WARNING: This page is about a different variant/trim than selected.

Refer to: JACKING AND LIFTING - OVERVIEW .
NOTE: Powertrain Control Module (PCM) installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the PATS.

NOTE: This step is only necessary when installing a new component.

Download the module information to the diagnostic tool using the Programmable Modules Installation routine.

Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .

Use the General Equipment: Ford Diagnostic Equipment
Remove the LH fender splash shield.
Refer to: FENDER SPLASH SHIELD .