FixVault
Home › Ford › 2014 › F-150 FX2, 2D Pickup › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission External Controls › Removal And Installation › Selector Lever Knob › Removal

Selector Lever Knob: Removal

  1. Remove the instrument panel to floor console finish panel.
    G08341262
  2. Remove the floor console upper finish panel.
    • Starting at the rear of the upper finish panel, carefully pry up the upper finish panel and disconnect the electrical connectors.
      G08341197
  3. Remove and discard the RH selector lever knob cover.
    1. Start at the bottom front.
    2. Move towards the top front and remove the cover.
      G08341251
  4. Remove and discard the LH selector lever knob cover.
    1. Start at the bottom front.
    2. Move towards the top front and remove the cover.
      G08341252
  5. Remove and discard the RH selector lever knob screw.
    G08341253
  6. Remove and discard the LH selector lever knob screw.
    G08341254
  7. Disconnect the Select Shift™ and the Tow/Haul electrical connectors and remove the selector lever knob.
About FixVault