Powertrain Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2015 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.

Powertrain/Drivetrain Mount Neutralizing

Adjustment

NOTE: Refer to the appropriate Engine article and procedure for special instructions on loosening and tightening mount fasteners.

1.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in the General Information article. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions

2.

Refer to: Jacking and Lifting - Overview

3.

Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

4.

Lower the vehicle.

5.

NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

6.

Raise and support the vehicle.

7.

Tighten the powertrain/drivetrain mount fasteners.

8.

Lower the vehicle.

9.

Test the system for normal operation.