Section 15 (Module Communications Network -- (Hybrid))
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Communications Network - Overview
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS) - System Operation and Component Description
- System Operation
- System Diagram
- Module Network Chart
- Network Termination
- Gateway Module
- High Speed Controller Area Network 1 and 2 (HS1-CAN, HS2-CAN)
- High Speed Controller Area Network 3 (HS3-CAN)
- Medium Speed Controller Area Network (MS-CAN)
- Controller Area Network (CAN) Fault Tolerance
- Fault Tolerance Normal Operation
- CAN Circuits Shorted Together
- CAN (+) Circuit Shorted to Ground
- CAN (-) Circuit Shorted to Ground
- CAN (+) Circuit Shorted to Battery Voltage
- CAN (-) Circuit Shorted to Battery Voltage
- CAN Circuit Signal Corruption
- Controller Area Network (CAN) Multiplex Messages - HEV and PHEV
- System Operation
- Diagnosis And Testing
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS)
- DTC Chart: Gateway Module (GWM)
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A: The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test B: The Secondary On-Board Diagnostic Control Module C (SOBDMC)/Transmission Control Module (TCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test C: The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test E: The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test F: The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test G: The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test H: The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test I: The FCIM (Front Controls Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test J: The Audio Front Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test K: The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test L: The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test M: The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test N: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test O: The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test P: The Digital Audio Control Module C (DACMC) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Q: The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test R: The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test S: The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test T: The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test U: The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test V: The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test W: The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test X: The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Y: The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Z: The HSWM (Heated Steering Wheel Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Aa: The SCME (Front Seat Climate Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ab: The TELEMATIC Control Unit (TCU) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ac: The Battery Energy Control Module (BECM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ad: The Secondary On-Board Diagnostic Control Module A (SOBDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AE: The ACCM (Air Conditioning Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AF: The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ag: The Generic Function Module (GFM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ah: The Tracking And Blocking System (Tbs) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ai: The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AJ: No High Speed Controller Area Network 1 (HS1-Can) Communication, All Modules Are Not Responding
- Pinpoint Test AK: No High Speed Controller Area Network 2 (HS2-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Al: No High Speed Controller Area Network 3 (HS3-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Am: No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
- Pinpoint Test An: No Power To The Data Link Connector (DLC)
- Communications Network - 2.0L Duratec - Hybrid (96kW/130PS)
- General Procedures
- Removal And Installation