FixVault
Home › Ford › 2014 › Mustang Base, 2D Convertible, Automatic Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Emission Control System › Removal And Installation › Exhaust Gas Recirculation (EGR) System Module Tube › Installation

Exhaust Gas Recirculation (EGR) System Module Tube: Installation

  1. Install the EGR system module tube and connect the EGR system module tube-to-exhaust manifold fitting.
    • Tighten to 40 Nm (30 lb-ft).
  2. Connect the EGR system module tube-to-EGR system module fitting.
    • Tighten to 40 Nm (30 lb-ft).
  3. Install the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .
About FixVault