FixVault
Home › Ford › 2014 › Transit Connect Titanium, 1.6L Eng VIN X › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission External Controls › Removal And Installation › Selector Lever Cable › Installation

Selector Lever Cable: Installation

  1. NOTICE: Gearshift cables must not be kinked or bent. 

    Attach a pull cord to the selector lever cable.

    Use the General Equipment: Draw Cord

    Use the General Equipment: Adhesive Tape

    G00553648
  2. To install, reverse the removal procedure.
  3. Adjust the selector lever cable. Refer to: Selector Lever Cable Adjustment .
About FixVault