Exhaust System Alignment

General Procedure 

• 1.
  
  With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting , Lifting Points.

• 2.
  
  Loosen all fasteners joining the exhaust system components.

• 3.
  
  Beginning at the front of the vehicle, align the exhaust system to establish the maximum clearance. Make sure all fit pipes are pushed all the way into the preceding pipe and the notches are correctly lined up with the tabs.

• 4.
  
  Beginning at the front of the vehicle, tighten all fasteners and clamps to specification. Refer to SPECIFICATIONS , Torque Specifications.

• 5.
  
  Start the engine and check the exhaust system for leaks.