FixVault
Home › Ford › 2015 › Explorer Sport › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 6F50/6F55 › Disassembly And Assembly Of Subassemblies › Transaxle Case › Disassembly

Transaxle Case: Disassembly

  1. 1.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Transfer Gear Bearing Race Remover 307-577
GFD38016Courtesy of FORD MOTOR COMPANY

  1. 2.

    Punch a hole in the fluid dam. Center punch.
GFD38017Courtesy of FORD MOTOR COMPANY

  1. 3.

    General Equipment: Dent Puller
GFD38018Courtesy of FORD MOTOR COMPANY

  1. 4.

    Special Tool(s): Differential Bearing Cup Remover 307-586

    1. 1.

      Position the Differential Bearing Cup Remover 307-586 in the transmission case with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the transmission case.

    1. 2.

      Expand the Differential Bearing Cup Remover 307-586 by hand.

    1. 3.

      While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the transmission case, tighten the nut.
GFD38019Courtesy of FORD MOTOR COMPANY

  1. 5.

    General Equipment: Shop Press
GFD38020Courtesy of FORD MOTOR COMPANY

  1. 6.

GFD38021Courtesy of FORD MOTOR COMPANY

  1. 7.

GFD38022Courtesy of FORD MOTOR COMPANY

  1. 8.

GFD38023Courtesy of FORD MOTOR COMPANY

  1. 9.

GFD38024Courtesy of FORD MOTOR COMPANY
About FixVault