Powertrain Drivetrain Mount Neutralizing

Adjustment

NOTE: Refer to the appropriate article and procedure for special instructions on loosening and tightening mount fasteners.

1.

Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

2.
Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

3.

Tighten the powertrain/drivetrain mount fasteners.

4.

Test the system for normal operation.