Pinpoint Test FB: Charge Air Cooler Temperature (CACT) Sensor: Introduction

NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

harness circuits: CACT and SIGRTN
CACT sensor (12A697)
PCM (12A650)

Fig 1: Identifying Charge Air Cooler Temperature (CACT) Sensor Connector

Courtesy of FORD MOTOR CO.

Pin	Circuit
2	SIGRTN (Signal Return)
1	CACT (Charge Air Cooler Temperature)

Fig 2: Identifying Powertrain Control Module-E (PCM-E) Connector

Courtesy of FORD MOTOR CO.

Pin	Circuit
4	SIGRTN (Signal Return)
13	CACT (Charge Air Cooler Temperature)