FixVault
Home › Ford › 2015 › Transit-350 HD Base, Van Cargo Extended › Repair and Diagnosis › External Pages › Different car › Section 27 (Supplemental Restraint System) › Removal And Installation › Front Impact Severity Sensor › Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Incorrect repair techniques or actions can cause an accidental Supplemental Restraint System deployment. Make sure the restraint system is depowered before reconnecting the component. Refer to Supplemental Restraint System (SRS) Depowering . Failure to precisely follow depowering instructions could result in serious personal injury from an accidental deployment.

  1. 1.

    NOTE: The impact sensor mating surfaces must be smooth and allow for a flush attachment to each other.

    To install, reverse the removal procedure.

  1. 2.

    Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
About FixVault