Torque Converter Housing: Disassembly

1. 1.
   
   Special Tool(s): Remover/Installer, Front Wheel Hub 204-069, Transfer Gear Bearing Race Remover 307-577

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Punch a hole in the fluid dam. Center punch.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   General Equipment: Dent Puller

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   Special Tool(s): Differential Bearing Cup Remover 307-586

   1. 1.
      
      Position the Differential Bearing Cup Remover 307-586 in the torque converter housing with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the torque converter housing.

   1. 2.
      
      Expand the Differential Bearing Cup Remover 307-586 by hand.

   1. 3.
      
      While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the torque converter housing, tighten the nut.

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   General Equipment: Shop Press

Courtesy of FORD MOTOR COMPANY

1. 7.
   
   

Courtesy of FORD MOTOR COMPANY