FixVault

Inspection and Verification

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    Verify the customer concern.

  1. 2.

    Visually inspect for obvious signs of mechanical or electrical damage.

  1. 3.

    If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step

  1. 4.

    If the cause is not visually evident, verify the symptom and refer to the Symptom Chart .
Mechanical  Electrical 
Transmission selector lever cable Brake Shift Interlock Actuator (BSIA)
Manual control lever Wiring harness
Selector lever Terminals
Selector lever knob Connectors
SelectShift™ paddle switches