Receiver Drier Cartridge: Installation

WARNING: This page is about a different car, the 2016 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

1.

To install, reverse the removal procedure.
- Install new gasket seals and O-ring seals.
- Add the correct amount of clean PAG oil to the refrigerant system. For additional information, refer to the Refrigerant Oil Adding procedure in Climate Control System General Information and Diagnostics .

2.

Evacuate, leak test and charge the refrigerant system. For additional information, refer to Climate Control System General Information and Diagnostics .