FixVault

Cruise-Control Module (C-CM): Removal

NOTE: The vertical and horizontal alignment procedures need to be carried out to align the sensor.

Cruise-Control Module(C-CM) or bracket 

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting .

  1. 2.

    Remove the front bumper cover. For additional information, refer to Bumpers .

  1. 3.

    NOTE: Gently pry to release the C-CM from the retaining studs
GFD85566Courtesy of FORD MOTOR COMPANY

  1. 4.

    NOTE: If one plastic grommet is damaged C-CM, a new grommet should be installed.
GFD85567Courtesy of FORD MOTOR COMPANY

Bracket 

  1. 5.

GFD85568Courtesy of FORD MOTOR COMPANY