Variable Camshaft Timing (VCT) Oil Control Solenoid - 3.5L Ti-VCT: Removal

NOTE: Removal steps in this procedure may contain installation details.

• 1.
  
  Remove the LH or RH valve cover. For 3.5L Ti-VCT, refer to Engine 3.5L Ti-VCT .

• 2.
  
  
  • To install, tighten in 2 stages.
    • Stage 1: Tighten to 8 Nm (71 lb-in).
    • Stage 2: Tighten an additional 20 degrees.

Courtesy of FORD MOTOR COMPANY