FixVault
Home › Ford › 2016 › Taurus SHO › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 6F50/6F55 › Disassembly And Assembly Of Subassemblies › Transaxle Case › Disassembly

Transaxle Case: Disassembly

  1. 1.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Transfer Gear Bearing Race Remover 307-577
GFD83953Courtesy of FORD MOTOR COMPANY

  1. 2.

    Punch a hole in the fluid dam. Center punch.
GFD83954Courtesy of FORD MOTOR COMPANY

  1. 3.

    General Equipment: Dent Puller
GFD83955Courtesy of FORD MOTOR COMPANY

  1. 4.

    Special Tool(s): Differential Bearing Cup Remover 307-586

    1. 1.

      Position the Differential Bearing Cup Remover 307-586 in the transmission case with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the transmission case.

    1. 2.

      Expand the Differential Bearing Cup Remover 307-586 by hand.

    1. 3.

      While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the transmission case, tighten the nut.
GFD83956Courtesy of FORD MOTOR COMPANY

  1. 5.

    General Equipment: Shop Press
GFD83957Courtesy of FORD MOTOR COMPANY
GFD83958Courtesy of FORD MOTOR COMPANY
GFD83959Courtesy of FORD MOTOR COMPANY
GFD83960Courtesy of FORD MOTOR COMPANY
GFD83961Courtesy of FORD MOTOR COMPANY
About FixVault