P06B6 - Internal Control Module Knock Sensor Processor 1 Performance
DTC DESCRIPTION P06B6 - INTERNAL CONTROL MODULE KNOCK SENSOR PROCESSOR 1 PERFORMANCE
| Description: | This DTC sets when the PCM has detected an error condition with the knock sensor (KS) processor integrated circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||