Disassembly And Assembly Of Subassemblies: Differential: Disassembly
- Inspect the differential bearings for damage or excessive wear. Install new bearings if necessary.
- Using special tools, remove the bearing.
Use Special Service Tool: 204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub.
Use the General Equipment: Puller
- Using special tools, remove the bearing.
Use Special Service Tool: 204-069 (T81P-1104-C) Remover/Installer, Front Wheel Hub.
Use the General Equipment: Puller
- Check the differential assembly and the ring gear for damage.
- Remove and discard the ring gear bolts.
- Remove the ring gear.
NOTE:
If the ring gear is replaced, a new transfer shaft must also be installed.