FixVault
Home › Ford › 2017 › F-150 Limited, 4WD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 10R80 › General Procedures › Adaptive Learning Drive Cycle

Adaptive Learning Drive Cycle

Activation 

NOTE: Perform the adaptive learning drive cycle on a level road surface.
  1. Record then clear the DTCs (Diagnostic Trouble Codes).
  2. Drive the vehicle until the engine and transmission reach normal operating temperature.
  3. Accelerate from a stop with light throttle (15%) ensuring that upshifts 1st through 8th occur at engine speeds between 1300-1600 RPM.
  4. Continue to accelerate (may apply slightly more throttle after 7-8 upshift at 32-38 mph (51-61 km/h) until you achieve 55 mph (88 km/h) and the 8-9 and 9-10 shifts complete.
  5. Brake very gently to a complete stop and hold foot on brake for five (5) seconds.
  6. Shift the transmission to Neutral. Wait 1 second.
  7. Shift the transmission to Reverse. Wait 2 seconds.
  8. Shift the transmission to Neutral. Wait 1 second.
  9. Shift the transmission to Drive. Wait 2 seconds.
  10. Repeat Steps 3 through 9 six additional times.
About FixVault