Engine Mount: Installation
WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Install the engine mount and the 3 bolts.
- Tighten to 90 Nm (66 lb-ft).
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Install the 4 engine mount nuts.
- Tighten to 63 Nm (46 lb-ft).
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Install the engine mount brace, nut and bolt.
- Tighten to 20 Nm (177 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Install the degas bottle. For additional information, refer to
Engine Cooling
.
- 5.
Connect the coolant hose to the coolant inlet pipe.
- Remove the hose clamp pliers.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Attach the A/C line retainer to the shock tower bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 7.
If equipped, install the underbody shield and attach the 4 retainers.
 Courtesy of FORD MOTOR COMPANY
|