Engine Mount: Removal

WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

1.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting .

2.

If equipped, release the 4 retainers and remove the underbody shield.

GFD87201

Courtesy of FORD MOTOR COMPANY

3.

NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan.

Position a floor jack with a block of wood under the front of the oil pan.

GFD87223

Courtesy of FORD MOTOR COMPANY

4.

Detach the A/C line retainer from the shock tower bracket.

GFD87240

Courtesy of FORD MOTOR COMPANY

5.

Using hose clamp pliers, pinch the lower degas bottle hose and remove the hose from the coolant inlet pipe.

GFD87217

Courtesy of FORD MOTOR COMPANY

6.

Remove the degas bottle. For additional information, refer to Engine Cooling .

7.

Remove the nut, bolt and engine mount brace.

GFD87224

Courtesy of FORD MOTOR COMPANY

8.

Remove the 4 engine mount nuts.

GFD87225

Courtesy of FORD MOTOR COMPANY

9.

Remove the 3 bolts and the engine mount.

GFD87226

Courtesy of FORD MOTOR COMPANY