Transmission Control Module (TCM): Removal

NOTE: The TCM is located on the RH frame rail.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
NOTE: This step is only necessary when installing a new component.

Download the module information to the diagnostic tool using the PMI routine. Refer to: Module Programming .
Remove the retainers and the TCM shield.

Courtesy of FORD MOTOR COMPANY
NOTE: Keep the TCM electrical connector straight when connecting it or damage the connector terminals can occur.
- Slide the lock tab up and disconnect the TCM electrical connector.
- Detach the TCM wiring harness retainer and position aside
- Remove the nuts and the TCM.

Courtesy of FORD MOTOR COMPANY