FixVault
Home › Ford › 2017 › Flex SEL, FWD › Repair and Diagnosis › Body & Frame › Seats › Seating System › Removal And Installation › Memory Set Switch › Removal And Installation

Removal And Installation

  1. 1.

    Remove the driver door trim panel. For additional information, refer to Interior Trim and Ornamentation .

  1. 2.

    Release the 4 tabs (2 shown in illustration) and remove the memory SET switch.
GFD59630Courtesy of FORD MOTOR COMPANY

  1. 3.

    To install, reverse the removal procedure.
About FixVault