Section 47 (Module Communications Network (Except Hybrid))
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Communications Network - Overview
- Communications Network - System Operation and Component Description
- System Operation
- System Diagram
- Network Messages Charts
- Network Termination
- Gateway Module
- High Speed Controller Area Network 1 and 2 (HS-CAN1, HS-CAN2)
- High Speed Controller Area Network 3 (HS-CAN3)
- Medium Speed Controller Area Network (MS-CAN)
- Controller Area Network (CAN) Fault Tolerance
- Controller Area Network (CAN) Multiplex Messages
- System Operation
- Diagnosis And Testing
- Communications Network
- DTC Chart: Gateway Module (GWM)
- Symptom Chart: Communication Network
- Pinpoint Tests
- Pinpoint Test A : The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test B : The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test C : The Vehicle Dynamics Module (VDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test D : The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test E : The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test F : The BECMB (Extended Power Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test G : The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test H : The GSM (Gearshift Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test I : The TRCM (Transmission Range Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test J : The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test K : The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test L : The FCIM (Front Controls Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test M : The Audio Front Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test N : The Headlamp Control Module (HCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test O : The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test P : The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Q : The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test R : The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test S : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test T : The TCU (TELEMATIC Control Unit Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test U : The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test V : The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test W : The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test X : The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Y : The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Z : The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Aa : The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ab : The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ac : The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ad : The Direct Current/Direct Current (Dc/Dc) Converter Control Module (Voltage Quality Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AE : The HSWM (Heated Steering Wheel Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AF : The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ag : No High Speed Controller Area Network 1 (HS-Can1) Communication, All Modules Are Not Responding
- Pinpoint Test Ah : No High Speed Controller Area Network 2 (HS-Can2) Communication, All Modules Are Not Responding
- Pinpoint Test Ai : No High Speed Controller Area Network 3 (HS-Can3) Communication, All Modules Are Not Responding
- Pinpoint Test AJ : No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
- Pinpoint Test AK : No Power To The Data Link Connector (DLC)
- Communications Network
- General Procedures
- Removal And Installation