Engine Mount: Installation
WARNING: This page is about a different variant/trim than selected.
- 1.
Install the engine mount and the 3 bolts.
- Tighten to 90 Nm (66 lb-ft).
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Install the 4 engine mount nuts.
- Tighten to 63 Nm (46 lb-ft).
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Install the degas bottle. For additional information, refer to
Engine Cooling
.
- 4.
Connect the coolant hose to the coolant inlet pipe.
- Remove the hose clamp pliers.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Attach the A/C line retainer to the shock tower bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
If equipped, install the skid plate and the 10 retainers.
- Tighten to 70 Nm (52 lb-ft).
 Courtesy of FORD MOTOR COMPANY
|
- 7.
If equipped, install the underbody shield and attach the 4 retainers.
 Courtesy of FORD MOTOR COMPANY
|