FixVault
Home
›
Ford
›
2017
›
Taurus SHO
›
Repair and Diagnosis
›
Suspension
›
Wheel Alignment
›
Suspension System - General Information
›
General Procedures
›
Toe Adjustment - Front
Toe Adjustment - Front
1.
Using alignment equipment and the manufacturer's instructions, measure the front toe.
2.
Start the engine and center the steering wheel.
3.
Turn the engine OFF and, using a suitable steering wheel holding device, lock the steering wheel in the straight-ahead position.
4.
Remove the steering gear bellows clamps.
Courtesy of FORD MOTOR COMPANY
5.
Loosen the nuts.
Courtesy of FORD MOTOR COMPANY
6.
NOTE:
Do not allow the steering gear bellows to twist when the tie rod is rotated.
Rotate the tie rods as necessary to adjust the toe setting.
7.
Tighten the tie-rod jam nuts to 63 Nm (46 lb-ft).
Courtesy of FORD MOTOR COMPANY
8.
Recheck the toe settings and adjust as necessary.
9.
Install the steering gear bellows clamps.