FixVault
Home › Ford › 2017 › Taurus SHO › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - 6F50/6F55 › Disassembly And Assembly Of Subassemblies › Differential Gear Assembly › Disassembly

Differential Gear Assembly: Disassembly

  1. 1.

    NOTE: AWD shown, FWD similar.

    Inspect the differential bearings for damage or excessive wear. Install new bearings if necessary.

GFD84001Courtesy of FORD MOTOR COMPANY

  1. 2.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Puller, Bearing 205-D064 (D84L-1123-A), Step Plate 205-D019 (D80L-630-8) (AWD) or Step Plate 205-D015 (D80L-630-4) (FWD).
GFD84002Courtesy of FORD MOTOR COMPANY

  1. 3.

    NOTE: AWD shown, FWD similar.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Puller, Bearing 205-D064 (D84L-1123-A), Step Plate 205-D019 (D80L-630-8).

GFD84003Courtesy of FORD MOTOR COMPANY

  1. 4.

    NOTE: If replacing the ring gear, it is also necessary to replace the transfer shaft.

    Check the differential assembly and the ring gear for damage. Visual check.

GFD84004Courtesy of FORD MOTOR COMPANY

  1. 5.

GFD84005Courtesy of FORD MOTOR COMPANY

  1. 6.

GFD84006Courtesy of FORD MOTOR COMPANY
About FixVault