In-Vehicle Crossbeam: Installation
WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
To install, reverse the removal procedure.
- 2.
NOTE:
Make sure that the tolerance absorbers turn without resistance.
NOTE:
In-vehicle cross beam shown without instrument panel for clarity.
Turn on both sides the tolerance absorber to the stop and turn back a half turn.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Check on both sides that the tolerance absorber contacts the A-pillar.
 Courtesy of FORD MOTOR COMPANY
|