Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2017 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Incorrect repair techniques or actions can cause an accidental pyrotechnic device deployment. Make sure the supplemental restraint and pedestrian protection system (if equipped) is depowered before reconnecting the component. Refer to Supplemental Restraint System (SRS) Depowering and Repowering . Failure to precisely follow depowering instructions could result in serious personal injury from an accidental deployment.

NOTE: Make sure the radiator support and front impact severity sensor mating surfaces are clean and free of foreign material before installation.

To install, reverse the removal procedure.
If the SRS was depowered, repower the SRS. REFER to: Supplemental Restraint System (SRS) Depowering and Repowering .