FixVault
Home › Ford › 2018 › Fiesta ST › Repair and Diagnosis › Body & Frame › Windows › Glass, Frames And Mechanisms › Removal And Installation › Front Door Window Control Switch › Installation

Front Door Window Control Switch: Installation

  1. To install, reverse the removal procedure.

    Vehicles With: One-Touch Up and Down Driver Window 

  2. NOTE: The master window control switch and the LH window motor must be initialized whenever battery voltage has been removed from the driver window control switch for greater than 3 minutes (for example, the battery or the master window switch is disconnected) or if a new driver window control switch is installed.

    If the door is equipped with one touch up/down, carry out the power door window initialization. Refer to: Power Door Window Initialization - Vehicles With: One-Touch Open and Close Driver Window/One-Touch Open and Close Front Windows .

About FixVault