Section 126 (Module Communications Network (Except Electric))
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Diagnosis And Testing
- Communications Network
- DTC Chart
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A : The Powertrain Control Module (Pcm) Does Not Respond To The Scan Tool
- Pinpoint Test B : The Abs (Anti-Lock Brake System) Module Does Not Respond To The Scan Tool
- Pinpoint Test C : The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
- Pinpoint Test D : The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Scan Tool
- Pinpoint Test E : The OCSM (Occupant Classification System Module) Does Not Respond To The Scan Tool
- Pinpoint Test F : The SASM (Steering Angle Sensor Module) Does Not Respond To The Scan Tool
- Pinpoint Test G : The IPC (Instrument Panel Cluster) Does Not Respond To The Scan Tool
- Pinpoint Test H : The ICM (Information Center Module) Does Not Respond To The Scan Tool
- Pinpoint Test I : The BCM (Body Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test J : The HVAC (Heating, Ventilation And Air Conditioning) Module Does Not Respond To The Scan Tool
- Pinpoint Test K : The ACM (Audio Front Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test L : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Scan Tool
- Pinpoint Test M : The DACMC (Digital Audio Control Module C) Does Not Respond To The Scan Tool
- Pinpoint Test N : The DDM (Driver Door Module) Does Not Respond To The Scan Tool
- Pinpoint Test O : The PDM (Passenger Door Module) Does Not Respond To The Scan Tool
- Pinpoint Test P : The IPMA (Image Processing Module A) Does Not Respond To The Scan Tool
- Pinpoint Test Q : The SODL (Side Obstacle Detection Control Module LH) Or SODR (Side Obstacle Detection Control Module RH) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test R : The GPSM (Global Positioning System Module) Does Not Respond To The Scan Tool
- Pinpoint Test S : The PAM (Parking Assist Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test T : The APIM (Sync Module) Does Not Respond To The Scan Tool
- Pinpoint Test U : The FCIM (Front Controls Interface Module) Does Not Respond To The Scan Tool
- Pinpoint Test V : The RFA (Remote Function Actuator) Module Does Not Respond To The Scan Tool
- Pinpoint Test W : The TCM (Transmission Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test X : The AWD (All-Wheel Drive) Module Does Not Respond To The Scan Tool
- Pinpoint Test Y : The PSCM (Power Steering Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test Z : The GFM2 (Generic Function Module 2) Does Not Respond To The Scan Tool
- Pinpoint Test Aa : The HCM (Headlamp Control Module) Does Not Respond To The Scan Tool
- Pinpoint Test Ab : No HS-Can (High-Speed Controller Area Network) Communication, All Modules Are Not Responding
- Pinpoint Test Ac : No Ms-Can (Medium Speed-Controller Area Network) Communication, All Modules Are Not Responding
- Pinpoint Test Ad : No Infotainment Controller Area Network (I-Can) Communication, All Modules Are Not Responding
- Pinpoint Test AE : No Power To The DLC (Data Link Connector)
- Communications Network
- General Procedures