Normal Operation and Fault Conditions
With the ignition ON, the SECM sends messages to the SASM over a private CAN. If the SASM does not receive these messages within a certain time frame (usually less than 1 second), the SASM sets DTCs. For information on the messages sent to the SASM by the SECM, refer to the Network Message Chart in ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL - SYSTEM OPERATION AND COMPONENT DESCRIPTION
PPT AZ SASM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0130:00 | Lost Communication With Steering Effort Control Module: No Sub Type Information | Sets in continuous memory and on-demand when the SASM detects any of the SECM messages are missing. This can be due to a SECM failure, a circuit failure on the private CAN or an excessive load on the network. |