FixVault
Home › Ford › 2018 › Focus ST › Repair and Diagnosis › External Pages › Different car › Section 366 (Roof Opening Panel) › General Procedures › Roof Opening Panel Alignment

Roof Opening Panel Alignment

WARNING: This page is about a different car, the 2018 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Adjustment 

  1. NOTE: The roof opening panel must be in the CLOSED position.

    Loosen the roof opening panel bolts on both sides.

    GFD303014Courtesy of FORD MOTOR COMPANY
  2. Measure and adjust the front of the roof opening panel glass to roof clearances as shown.
    GFD303015Courtesy of FORD MOTOR COMPANY
  3. Measure and adjust the rear of the roof opening panel glass to roof clearances as shown.
    GFD303016Courtesy of FORD MOTOR COMPANY
  4. Tighten the roof opening panel bolts on both sides.

    Torque: 35 lb.in (4 Nm)

    GFD303014Courtesy of FORD MOTOR COMPANY
  5. Initialize the power roof opening panel. Refer to: Power Roof Opening Panel Initialization .
About FixVault