Third Row Seats
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
The third row seats are a 60/40 percent folding split bench design with optional power-fold system option.
The third row seat includes the following serviceable items:
- All trim covers
- Backrest and cushion foam pads
- Backrest and cushion covers
- Backrest and cushion frames
- Release handle and bezel attached to the backrest frame
- Seat track attached to the seat base
- Safety belt buckles attached to the seat track
- Center safety belt retractor attached to the 60 percent seat backrest frame
Third Row Power-Fold Seat
The third row power-fold seats are activated by the rear power-fold seat switches. The power-fold seats only operate with the vehicle in PARK, and the liftgate glass, liftgate door or any entry door is open, allowing the BCM to enable power to the third row power-fold seat system.
The third row power-fold seat system includes the following serviceable components:
- BCM located behind the instrument panel
- Power-Fold Seat Module(PFSM) located behind the RH rear quarter trim panel
- RH and LH power-fold seat motors (includes drive gear assemblies to raise and lower the seat backrests) attached to the base of the seat
- Third row seat control switch attached to the RH rear quarter trim panel