Driver Front Seat Module (DSM): Installation

All vehicles 

1. To install, reverse the removal procedure.

   Vehicles with memory seats 

2. NOTE: This step is only necessary when installing a new component.

   Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions. Operate the seat in all directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.

   Vehicle with climate control seats 

3. NOTE: This step is only necessary when installing a new component.

   Using a diagnostic scan tool, complete the PMI process for the SCME following the on-screen instructions.

   All vehicles 

4. NOTE: This step is only necessary when installing a new component.

   Operate the seat in all directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.