Pinpoint Test P : B10A2:02: Notes
Refer to Supplemental Restraint System for schematic and connector information.
Normal Operation and Fault Conditions
When an impact occurs which exceeds a pre-determined threshold, the RCM sends a signal on a dedicated circuit to the BCM. The event notification feature provides information pertaining to fuel cutoff status.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10A2:02 | Crash Input General Failure Information: General Signal Failure | A continuous memory DTC that sets in the BCM if the 5 volt signal from the RCM is missing. |
Possible Sources
- Wiring, terminals or connectors
- RCM
- BCM