External Controls - Overview

The transmission selector lever linkage consists of:

• a selector lever cable that connects the transmission manual control lever to the selector lever assembly.
• a brake shift interlock actuator that is integral to the selector lever assembly.

The selector lever assembly:

• locks the transmission selector lever in the P position when the ignition switch is in the LOCK position.
• requires the transmission selector lever to be in the P position to turn the ignition switch to the LOCK position.
• has a SelectShift™ switch mounted on the selector lever knob that allows the driver to manually shift the transmission (if equipped).
• has upshift and downshift paddle switches mounted on the steering wheel that allow the driver to manually shift the transmission (if equipped).